74ACTQ373SJ
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 1999 |
| Series | 74ACTQ |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACTQ373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 7.5 ns |
| Turn On Delay Time | 6.5 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 6.5ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACTQ373SJ Overview
The 20-SOIC (0.209, 5.30mm Width) package contains it. A package of Tube has been used. It uses Tri-State as its output configuration. There is a logic type of D-Type Transparent Latch associated with this electrical device. Electronic parts are mounted in accordance with Surface Mount. In order for it to operate, it needs a supply voltage of 4.5V~5.5V. During operation, the temperature is set at -40°C~85°C. In the 74ACTQ series, this FPGA is located. 8 Bits are used in the design of this electronic part. This type belongs to the 74ACTQ373 family. Designed with 20 pins, it is compatible with a wide range of devices. A Surface Mount mounting method has been used for this electronic part. It contains 8 input lines where electronic circuits are present. High efficiency requires a voltage supply of 5V. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. 1 elements are present in it. The circuit's superior flexibility is achieved through the use of 8 circuits. In the low level output current, the value is set to 24mA. It is set to zero for the high level output current. Lower than 85°C is the recommended operating temperature. Temperatures above -40°C should be used. 5.5V is the maximum voltage it supports. The minimal voltage for operation is 4.5V.
74ACTQ373SJ Features
20-SOIC (0.209, 5.30mm Width) package
74ACTQ series
8 Bits
74ACTQ373 family
20 pins
1 elements
74ACTQ373SJ Applications
There are a lot of ON Semiconductor 74ACTQ373SJ Latches applications.
- Shift left with parallel loading
- Relay replacement
- Counter control
- Synchronous frequency dividers
- Parallel Output
- Clocks
- Display driver
- Parallel data storage
- Multistage ripple counting
- Serial Output Register