74ACT825SCX_SF87271A
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-SOIC (0.295, 7.50mm Width) |
| Supplier Device Package | 24-SOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT825 |
| Function | Master Reset |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Clock Frequency | 158MHz |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 9.5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACT825SCX_SF87271A Overview
24-SOIC (0.295, 7.50mm Width)is the packaging method. It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. Currently, the operating temperature is -40°C~85°C TA. D-Typedescribes this flip flop. In FPGA terms, D flip flop is a type of 74ACTseries FPGA. Its output frequency should not exceed 158MHz. A total of 1elements are present in it. During its operation, it consumes 80μA quiescent energy. This D latch belongs to the family of 74ACT825. JK flip flop input capacitance is 4.5pF farads.
74ACT825SCX_SF87271A Features
Tape & Reel (TR) package
74ACT series
74ACT825SCX_SF87271A Applications
There are a lot of ON Semiconductor 74ACT825SCX_SF87271A Flip Flops applications.
- Cold spare funcion
- Power down protection
- Balanced 24 mA output drivers
- Bus hold
- Counters
- Bounce elimination switch
- Buffered Clock
- Registers
- Storage Registers
- 2 – Bit synchronous counter