74ACT818SPC

74ACT818SPC

74ACT818SPC datasheet pdf and Logic - Shift Registers product details from Fairchild (ON Semiconductor) stock available at ORIGCHIP


  • Manufacturer: Fairchild (ON Semiconductor)
  • Origchip NO: 295-74ACT818SPC
  • Package: PDIP
  • Datasheet: PDF
  • Stock: 585
  • Description: 74ACT818SPC datasheet pdf and Logic - Shift Registers product details from Fairchild (ON Semiconductor) stock available at ORIGCHIP(Kg)

Details

Tags

Parameters
Mount Through Hole
Package / Case PDIP
Number of Pins 24
Packaging Bulk
JESD-609 Code e3
Number of Terminations 24
Terminal Finish Matte Tin (Sn)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature SCANNABLE
Technology CMOS
Terminal Position DUAL
Peak Reflow Temperature (Cel) NOT SPECIFIED
Number of Functions 1
Supply Voltage 5V
Terminal Pitch 2.54mm
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 24
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 1
Max Supply Voltage 5.5V
Min Supply Voltage 4.5V
Number of Ports 2
Number of Bits 8
Propagation Delay 13 ns
Quiescent Current 8μA
Turn On Delay Time 14.5 ns
Family ACT
Number of Inputs 9
Output Characteristics 3-STATE
Logic IC Type BUS DRIVER
High Level Output Current -24mA
Low Level Output Current 24mA
Clock Edge Trigger Type Positive Edge
Width 7.62mm
RoHS Status RoHS Compliant
Lead Free Contains Lead

74ACT818SPC Overview


There is an embedded device in the package PDIP. 24 is the total number of terminations on the chip. This item is packed in case Bulk. There is 5V operating supply voltage listed on the part. It is equipped with a pin count of 24. The mounting method should be Through Hole. The electronic component belongs to the ACT. This chip's operating supply voltage is reported as 5V. Additional aspects of this section are as follows: SCANNABLE. The total number of IC chip bits is 8. It has a total of 24 pins. It is recommended that it be used at temperatures below 85°C. Operation of this device requires a value greater than -40°C. It is employed under the condition of 5.5V. It is used at a voltage greater than 4.5V. As a result, it runs at a quiescent current of 8μA. This device contains 1 circuits.

74ACT818SPC Features


With 24 pins
Operate supply voltage at 5V
Quiescent Current at 8μA

74ACT818SPC Applications


There are a lot of Fairchild (ON Semiconductor) 74ACT818SPC Shift Registers applications.

  • 7-segment display control
  • Serial-to-parallel data conversion
  • Output expansion
  • Pseudo Random Pattern Generator
  • ROM Chips
  • Parallel to serial converter
  • Data manipulation
  • Data Format Converters
  • Delay Line
  • data manipulation

Write a review

Note: HTML is not translated!
    Bad           Good