74ACT574SC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOIC |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Termination | SMD/SMT |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 110MHz |
| Base Part Number | 74ACT574 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Output Current | 24mA |
| Number of Bits | 8 |
| Clock Frequency | 110MHz |
| Propagation Delay | 12 ns |
| Turn On Delay Time | 7 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Number of Inputs | 1 |
| Current - Output High, Low | 24mA 24mA |
| Number of Gates | 8 |
| Number of Bits per Element | 8 |
| Max Frequency | 85MHz |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 8 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT574SC Overview
It is embeded in 20-SOIC (0.295, 7.50mm Width) case. It is contained within the Tubepackage. T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis used in the operation. This D latch has the type D-Type. In terms of FPGAs, it belongs to the 74ACT series. It should not exceed 110MHzin its output frequency. The list contains 1 elements. This process consumes 40μA quiescents. It is a member of the 74ACT574 family. Its input capacitance is 4.5pFfarads. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. In this device, the clock edge trigger type is Positive Edge. It is designed with a number of bits of 8. 8 circuits are used to achieve its superior flexibility. High efficiency requires the supply voltage to be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. It operates with 3 output lines. 8input lines are available for you to choose from. -24mA is set as the high level output current. There is 24mA output current at the low level. It is recommended that the operating temperature be below 85°C. A temperature above -40°Cshould be used for the operation. The minimal supply voltage is 4.5V. It is capable of supporting a maximum supply voltage of 5.5V. It is possible to obtain a frequency of 110MHz. There are 8 gates in its basic building block. D flip flop includes 1 inpits.
74ACT574SC Features
Tube package
74ACT series
20 pins
8 Bits
8 gates
74ACT574SC Applications
There are a lot of ON Semiconductor 74ACT574SC Flip Flops applications.
- Divide a clock signal by 2 or 4
- Circuit Design
- Event Detectors
- Buffered Clock
- Bounce elimination switch
- Buffer registers
- Balanced Propagation Delays
- EMI reduction circuitry
- Reduced system switching noise
- Clock pulse