74ACT374PC
| Parameters | |
|---|---|
| Mounting Type | Through Hole |
| Package / Case | 20-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74ACT |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT APPLICABLE |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT APPLICABLE |
| JESD-30 Code | R-PDIP-T20 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 160MHz |
| Family | ACT |
| Current - Quiescent (Iq) | 40μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | TRUE |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Height Seated (Max) | 5.33mm |
| Length | 25.905mm |
| Width | 7.62mm |
| RoHS Status | ROHS3 Compliant |
74ACT374PC Overview
The flip flop is packaged in 20-DIP (0.300, 7.62mm). There is an embedded version in the package Tube. This output is configured with Tri-State, Non-Inverted. There is a trigger configured with Positive Edge. Through Holemounts this electrical part. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74ACT series. There should be no greater frequency than 160MHzon its output. There are 1 elements in it. During its operation, it consumes 40μA quiescent energy. There have been 20 terminations. Power is provided by a 5V supply. Input capacitance of this device is 4.5pF farads. It is a member of the ACTfamily of D flip flop. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. The D flip flop has no ports embedded.
74ACT374PC Features
Tube package
74ACT series
74ACT374PC Applications
There are a lot of Rochester Electronics, LLC 74ACT374PC Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Bounce elimination switch
- Frequency Divider circuits
- Supports Live Insertion
- Buffer registers
- Shift registers
- Computing
- Functionally equivalent to the MC10/100EL29
- Count Modes
- Data Synchronizers