74ACT374MSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 1998 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 160MHz |
| Base Part Number | 74ACT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 160MHz |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 8.5 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -24mA |
| Input Capacitance | 4.5pF |
| Low Level Output Current | 24mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT374MSA Overview
As a result, it is packaged as 20-SSOP (0.209, 5.30mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. A temperature of -40°C~85°C TAis used in the operation. It is an electronic flip flop with the type D-Type. It is a type of FPGA belonging to the 74ACT series. In order for it to function properly, its output frequency should not exceed 160MHz. The element count is 1 . T flip flop consumes 40μA quiescent energy. Members of the 74ACT374family make up this object. There is 4.5pF input capacitance for this T flip flop. This electronic part is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. The flip flop is designed with 8bits. Its flexibility is enhanced by 8 circuits. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It has 3 output lines to operate. It has 1lines. A high level output current of -24mAis set. There is 24mA output current at the low level. Temperatures below 85°Care ideal for operating. A temperature above -40°Cshould be used for the operation. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. It is possible to obtain a frequency of 160MHz.
74ACT374MSA Features
Tube package
74ACT series
20 pins
8 Bits
74ACT374MSA Applications
There are a lot of ON Semiconductor 74ACT374MSA Flip Flops applications.
- QML qualified product
- Modulo – n – counter
- EMI reduction circuitry
- Patented noise
- Communications
- Storage registers
- Digital electronics systems
- Parallel data storage
- Individual Asynchronous Resets
- Data transfer