74ACT373SJX
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SOP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 1999 |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT373 |
| Output Type | Tri-State |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Circuit | 8:8 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Propagation Delay | 10 ns |
| Turn On Delay Time | 8 ns |
| Logic Function | D-Type, Latch |
| Current - Output High, Low | 24mA 24mA |
| Logic Type | D-Type Transparent Latch |
| High Level Output Current | -24mA |
| Low Level Output Current | 24mA |
| Number of Input Lines | 2 |
| Independent Circuits | 1 |
| Number of Output Lines | 3 |
| Delay Time - Propagation | 8ns |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT373SJX Overview
In the 20-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. The package is in the form of Tape & Reel (TR). Tri-State is used for the output it is configured with. This electrical device has a logic type of D-Type Transparent Latch. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. A temperature of -40°C~85°C is set as the operating temperature. It is a type of FPGA belonging to the 74ACT series. With this electronic part, there are 8 bits. There is no doubt that it belongs to the family 74ACT373. The 20 pins are designed into it. It is mounted according to the Surface Mount method. There are 2 input lines in which electronic circuits are present. High efficiency requires a supply voltage of 5V. 3 output lines provide binary equivalents of input lines. A total of 1 elements make up this object. The superior flexibility of this circuit can be attributed to the use of 8 circuits. 24mA represents the low level output current. The high level output current is set to -24mA. A temperature below 85°C should be used for operation. A temperature greater than -40°C should be used as the operating temperature. There is a maximum voltage of 5.5V supported. The minimal voltage for operation is 4.5V.
74ACT373SJX Features
20-SOIC (0.209, 5.30mm Width) package
74ACT series
8 Bits
74ACT373 family
20 pins
1 elements
74ACT373SJX Applications
There are a lot of ON Semiconductor 74ACT373SJX Latches applications.
- Serial Input
- Hammer Device Information
- Shift Registers
- General-Purpose Register
- Decade counting
- Relay
- Instrumentation
- Hammer
- Frequency dividing
- Buffer register