74ACT175MTC
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-TSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT175 |
| Function | Master Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 4 |
| Clock Frequency | 236MHz |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 6 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 40μA |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Output Lines | 2 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ACT175MTC Overview
As a result, it is packaged as 16-TSSOP (0.173, 4.40mm Width). As part of the package Tube, it is embedded. Differentialis the output configured for it. The trigger it is configured with uses Positive Edge. It is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. Temperature is set to -40°C~85°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74ACTseries of FPGAs. It should not exceed 236MHzin its output frequency. In total, it contains 1 elements. T flip flop consumes 40μA quiescent energy. D latch belongs to the 74ACT175 family. Its input capacitance is 4.5pF farads. The electronic part is mounted in the way of Surface Mount. This board is designed with 16pins on it. This device has Positive Edgeas its clock edge trigger type. Due to its superior flexibility, it uses 4 circuits. If high efficiency is desired, the supply voltage should be kept at 5V. To operate, the chip has a total of 2 output lines.
74ACT175MTC Features
Tube package
74ACT series
16 pins
74ACT175MTC Applications
There are a lot of ON Semiconductor 74ACT175MTC Flip Flops applications.
- Divide a clock signal by 2 or 4
- Latch
- Bus hold
- Supports Live Insertion
- Functionally equivalent to the MC10/100EL29
- Buffered Clock
- Count Modes
- Differential Individual
- Event Detectors
- Parallel data storage