74ACT163PC
| Parameters | |
|---|---|
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 16-DIP (0.300, 7.62mm) |
| Number of Pins | 16 |
| Supplier Device Package | 16-PDIP |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT163 |
| Number of Outputs | 4 |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 4 |
| Propagation Delay | 11 ns |
| Turn On Delay Time | 15 ns |
| Reset | Synchronous |
| Logic Function | Counter |
| Direction | Up |
| Logic Type | Binary Counter |
| Number of Bits per Element | 4 |
| Trigger Type | Positive Edge |
| Sync/Async | Synchronous |
| Number of Input Lines | 4 |
| Number of Output Lines | 4 |
| Clock Edge Trigger Type | Positive Edge |
| Count Rate | 140MHz |
| Timing | Synchronous |
| RoHS Status | RoHS Compliant |
74ACT163PC Overview
In the 16-DIP (0.300, 7.62mm)package, it is supplied. There are 1 terminations on the device. It is packaged in a manner consistent with Tube. As part of the circuit, there are 16pins that connect other components. It is mounted in the direction of [0]. Due to its membership in the 74ACTseries, it is suitable for a variety of applications. The logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~85°C. This device is mounted in a Through Holemanner. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. An array consists of 4bits for each element. There is information in the device in the form of 4bits. Its base part number, [0], contains more related parts. It operates at the maximum temperature of 85°C for extended periods of time with acceptable stability of its electrical characteristics. This device is designed to operate within a specified temperature range with a lower limit generally set at -40°C. The maximum voltage available for the device reaches 5.5V. There is a minimum voltage available for the device of 4.5V. There are 4 input lines for the input of binary data in the form of on/off signals. The device has a total of 4 output lines. For normal operation, it is designed with circuits of type [0]. As a result, the system sends 4outputs.
74ACT163PC Features
Embedded in the 16-DIP (0.300, 7.62mm) package
4 bits per element
74ACT163PC Applications
There are a lot of ON Semiconductor 74ACT163PC Counters & Dividers applications.
- Control counters
- Dual Up Counters
- Divide-by-N counting
- Counter control/timers
- MULTIPLICATION
- SQUARING
- Signal gating
- Digital multiplexing and demultiplexing
- Fixed and programmable counters greater than 10
- Communications Digital Frequency Synthesizers;