74ACT16374MTD
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Supplier Device Package | 48-TSSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Voltage - Supply | 4.5V~5.5V |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Clock Frequency | 71MHz |
| Current - Quiescent (Iq) | 80μA |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 7.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
74ACT16374MTD Overview
In the form of 48-TFSOP (0.240, 6.10mm Width), it has been packaged. Package Tubeembeds it. The output it is configured with uses Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. This electronic flip flop is of type D-Type. The 74ACTseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 71MHz. D latch consists of 2 elements. During its operation, it consumes 80μA quiescent energy. The 74ACT16374family includes it. This T flip flop has a capacitance of 4.5pF farads at the input.
74ACT16374MTD Features
Tube package
74ACT series
74ACT16374MTD Applications
There are a lot of ON Semiconductor 74ACT16374MTD Flip Flops applications.
- Memory
- Frequency Dividers
- Shift Registers
- CMOS Process
- Supports Live Insertion
- Bus hold
- Event Detectors
- Counters
- Consumer
- Instrumentation