74ACT16374DLRG4
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Number of Pins | 48 |
| Weight | 600.301152mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Packing Method | TR |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Base Part Number | 74ACT16374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
| Number of Bits | 16 |
| Clock Frequency | 65MHz |
| Propagation Delay | 13.4 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.8 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 10.9ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Count Direction | UNIDIRECTIONAL |
| Clock Edge Trigger Type | Positive Edge |
| Translation | N/A |
| Height | 2.79mm |
| Length | 15.88mm |
| Width | 7.49mm |
| Thickness | 2.59mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74ACT16374DLRG4 Overview
The item is packaged in 48-BSSOP (0.295, 7.50mm Width)cases. There is an embedded version in the package Tape & Reel (TR). The output it is configured with uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 4.5V~5.5Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. D-Typeis the type of this D latch. The 74ACTseries comprises this type of FPGA. There should be no greater frequency than 65MHzon its output. D latch consists of 2 elements. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. You can search similar parts based on 74ACT16374. Power is supplied from a voltage of 5V volts. JK flip flop input capacitance is 4.5pF farads. Devices in the ACTfamily are electronic devices. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 48. In this device, the clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. An electronic part with 16bits has been designed. A reliable performance of this D flip flop makes it well suited for use in TR. There are 5V power supplies attached to it. A D flip flop with 2embedded ports is available. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 24mA, it is very flexible in terms of design. There are 3 output Lines, which generate the binary equivalent of the input line whose value is equal to “1” and are available to encode either a decimal or hexadecimal input pattern to typically a binary or “B. C. D” (binary coded decimal) output code. Currently, there are 1 input lines present. This D latch consumes 8μA quiescent current at all.
74ACT16374DLRG4 Features
Tape & Reel (TR) package
74ACT series
48 pins
16 Bits
5V power supplies
74ACT16374DLRG4 Applications
There are a lot of Texas Instruments 74ACT16374DLRG4 Flip Flops applications.
- Registers
- Communications
- Modulo – n – counter
- Balanced Propagation Delays
- Memory
- Guaranteed simultaneous switching noise level
- Dynamic threshold performance
- Functionally equivalent to the MC10/100EL29
- Consumer
- ESD performance