74ACT11374NT
| Parameters | |
|---|---|
| Number of Bits | 8 |
| Clock Frequency | 70MHz |
| Propagation Delay | 13 ns |
| Quiescent Current | 8μA |
| Turn On Delay Time | 8.5 ns |
| Family | ACT |
| Logic Function | D-Type, Flip-Flop |
| Current - Output High, Low | 24mA 24mA |
| Max Propagation Delay @ V, Max CL | 11.3ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| Max Frequency@Nom-Sup | 55000000Hz |
| Width | 7.62mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Contact Plating | Gold |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 24-DIP (0.300, 7.62mm) |
| Number of Pins | 24 |
| Weight | 1.753503g |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ACT |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | D-Type |
| Subcategory | FF/Latches |
| Technology | CMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Base Part Number | 74ACT11374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Power Supplies | 5V |
| Number of Circuits | 8 |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Output Current | 24mA |
74ACT11374NT Overview
It is embeded in 24-DIP (0.300, 7.62mm) case. D flip flop is included in the Tubepackage. T flip flop uses Tri-State, Non-Invertedas its output configuration. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74ACTseries of FPGAs. This D flip flop should not have a frequency greater than 70MHz. In total, there are 1 elements. There are 24 terminations,JK flip flop belongs to 74ACT11374 family. Power is supplied from a voltage of 5V volts. The input capacitance of this JK flip flopis 4pF farads. It is a member of the ACTfamily of D flip flop. The electronic part is mounted in the way of Through Hole. It is designed with 24 pins. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. There are 8bits in its design. Using 8 circuits, it is highly flexible. The D latch runs on a voltage of 5V volts. This flip flop has a total of 2ports. For high efficiency, the supply voltage should be set to 5V. With an output current of 24mA, it is possible to design the device in any way you want. It operates with 3 output lines. There is 8μA quiescent current consumption by it.
74ACT11374NT Features
Tube package
74ACT series
24 pins
8 Bits
5V power supplies
74ACT11374NT Applications
There are a lot of Texas Instruments 74ACT11374NT Flip Flops applications.
- Convert a momentary switch to a toggle switch
- ESCC
- Frequency Dividers
- Control circuits
- ATE
- Registers
- Computing
- Frequency Divider circuits
- Test & Measurement
- Balanced 24 mA output drivers