| Parameters |
| Package / Case |
PDIP |
| Surface Mount |
NO |
| Pbfree Code |
no |
| Number of Terminations |
20 |
| Additional Feature |
CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE |
| HTS Code |
8542.39.00.01 |
| Subcategory |
Shift Registers |
| Technology |
CMOS |
| Terminal Position |
DUAL |
| Terminal Form |
THROUGH-HOLE |
| Peak Reflow Temperature (Cel) |
NOT SPECIFIED |
| Number of Functions |
1 |
| Supply Voltage |
5V |
| Terminal Pitch |
2.54mm |
| Reach Compliance Code |
not_compliant |
| Time@Peak Reflow Temperature-Max (s) |
NOT SPECIFIED |
| Pin Count |
20 |
| Qualification Status |
Not Qualified |
| Operating Temperature (Max) |
85°C |
| Operating Temperature (Min) |
-40°C |
| Supply Voltage-Max (Vsup) |
5.5V |
| Power Supplies |
3.3/5V |
| Temperature Grade |
INDUSTRIAL |
| Supply Voltage-Min (Vsup) |
3V |
| Load Capacitance |
50pF |
| Number of Bits |
10 |
| Family |
AC |
| Output Polarity |
TRUE |
| Logic IC Type |
SERIAL IN PARALLEL OUT |
| Trigger Type |
POSITIVE EDGE |
| Propagation Delay (tpd) |
10 ns |
| fmax-Min |
60 MHz |
| Count Direction |
RIGHT |
| Max Frequency@Nom-Sup |
40000000Hz |
| Height Seated (Max) |
5.08mm |
| Length |
24.325mm |
| Width |
7.62mm |
| RoHS Status |
Non-RoHS Compliant |
74AC11898N Overview
The device is embedded in PDIP package. This chip has a total termination count of 20. Parts with a 5V operating supply voltage are specified. An electronic component is included in the AC. There are also the following additional considerations in this section: CENTER VCC/GND PINS; FLOW THROUGH ARCHITECTURE. There should be no less than 3V supply voltage (Vsup) for this part. There is a possibility of delivering voltage at 3.3/5V. This part requires a maximum supply voltage (Vsup) of 5.5V. A total of 10 bits are present on an IC chip. 20 pins are on it. Shift Registers is its subcategory. Temperatures above 85°C must be avoided.
74AC11898N Features
It supplies 3.3/5V power
74AC11898N Applications
There are a lot of Texas Instruments 74AC11898N Shift Registers applications.
- Pattern Recognizers
- Remote control holding register
- ROM Chips
- Flash Memory
- Pseudo Random Pattern Generator
- 8-bit data storage
- Delay Line
- Output expansion
- data manipulation
- Generate time delay toward digital circuits