74AC11257DW
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SOIC (0.295, 7.50mm Width) |
| Number of Pins | 20 |
| Weight | 500.709277mg |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| Type | Multiplexer |
| Additional Feature | CENTER VCC/GND PINS |
| Technology | CMOS |
| Voltage - Supply | 3V~5.5V |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 4 |
| Supply Voltage | 5V |
| Base Part Number | 74AC11257 |
| Pin Count | 20 |
| Number of Outputs | 1 |
| Operating Supply Voltage | 5V |
| Circuit | 4 x 2:1 |
| Supply Voltage-Min (Vsup) | 3V |
| Number of Channels | 4 |
| Load Capacitance | 50pF |
| Number of Bits | 2 |
| Propagation Delay | 6.5 ns |
| Family | AC |
| Number of Inputs | 8 |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 24mA 24mA |
| Supply Type | Dual |
| Bandwidth | 100MHz |
| Output Polarity | TRUE |
| Voltage Supply Source | Dual Supply |
| Independent Circuits | 1 |
| Height | 2.65mm |
| Length | 12.8mm |
| Width | 7.5mm |
| Thickness | 2.35mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
74AC11257DW Overview
It is included in the 20-SOIC (0.295, 7.50mm Width) in order to save board space.The package is packaged in the manner of Tube.Digital switch ic uses a Surface Mount mounting method.As the analog part, the circuit uses an analog IC Multiplexer.As long as the operating temperature is -40°C~85°C, turn signal switch will not be influenced by external factors.Using a 3V~5.5V supply voltage provides digital controlled switch's superior flexibility for designers.Multiplexers from the 74AC series can be used in a wide range of applications.As part of its basic configuration, 20 terminations are designed as a part of it.There is a base part number of 74AC11257 which can also be used in order to locate the logic switch that are related to this item.In this case, 5V is the voltage supplied to the multiplexer's system.In this turn signal switch, there are 20 components that can be connected to each pin.As the end of conductors, it uses GULL WING.This supply type employs Dual.Currently, it is configured with 20 pins.The multiplexer ic is mounted in the direction of Surface Mount.Among the family of AC the logic switch is a member.As a result, signal multiplexer provides 2 bits.Vsup should be kept at 3V to prevent some unnecessary failures.The turn signal switch operates with 1 outputs.It is possible to achieve reliable performance of the multiplexers with a voltage supply of 5V.In this multiplexer, there is a total of 8 inputs.This turn signal switch's circuit uses 4 transmission channels.In addition, CENTER VCC/GND PINS exhibits improved characteristics.
74AC11257DW Features
Supplied in the 20-SOIC (0.295, 7.50mm Width) package
Adopting a supply type of Dual
Operating with the supply voltage of 5V
CENTER VCC/GND PINS
74AC11257DW Applications
There are a lot of Texas Instruments 74AC11257DW Signal Switches / Multiplexers / Decoders applications.
- PCIe
- Electronically controlled engine system
- Robotic vehicles
- War field flying robot with a night vision flying camera
- Idle motor
- Frequency multiplexing system
- Automatic Monitoring systems
- LVDS
- Make full adder
- Seven segment displays