74AC109SJ
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74AC |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| Type | JK Type |
| Terminal Finish | MATTE TIN |
| Technology | CMOS |
| Voltage - Supply | 2V~6V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Function | Set(Preset) and Reset |
| Qualification Status | Not Qualified |
| Output Type | Differential |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 6V |
| Supply Voltage-Min (Vsup) | 2V |
| Clock Frequency | 175MHz |
| Family | AC |
| Current - Quiescent (Iq) | 2μA |
| Current - Output High, Low | 24mA 24mA |
| Output Polarity | COMPLEMENTARY |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 10ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4.5pF |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74AC109SJ Overview
It is packaged in the way of 16-SOIC (0.209, 5.30mm Width). There is an embedded version in the package Tube. T flip flop uses Differentialas its output configuration. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 2V~6V volts. A temperature of -40°C~85°C TAis used in the operation. JK Typeis the type of this D latch. JK flip flop is a part of the 74ACseries of FPGAs. You should not exceed 175MHzin its output frequency. A total of 2elements are contained within it. It consumes 2μA of quiescent current without being affected by external factors. There have been 16 terminations. It is powered by a voltage of 3.3V . There is 4.5pF input capacitance for this T flip flop. An electronic device belonging to the family ACcan be found here. The maximal supply voltage (Vsup) reaches 6V. Normally, the supply voltage (Vsup) should be above 2V.
74AC109SJ Features
Tube package
74AC series
74AC109SJ Applications
There are a lot of Rochester Electronics, LLC 74AC109SJ Flip Flops applications.
- Control circuits
- QML qualified product
- Frequency Dividers
- Bounce elimination switch
- Power down protection
- Data Synchronizers
- Computers
- Guaranteed simultaneous switching noise level
- Differential Individual
- Communications