74ABT823PW,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2014 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | WITH CLEAR AND CLOCK ENABLE |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT823 |
| JESD-30 Code | R-PDSO-G24 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 200MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 9 |
| Max Propagation Delay @ V, Max CL | 6.1ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 6.8 ns |
| Power Supply Current-Max (ICC) | 34mA |
| Length | 7.8mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
74ABT823PW,118 Overview
The flip flop is packaged in 24-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. In the configuration, Tri-State, Non-Invertedis used as the output. This trigger uses the value Positive Edge. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is -40°C~85°C TA. A flip flop of this type is classified as a D-Type. FPGAs belonging to the 74ABTseries contain this type of chip. Its output frequency should not exceed 200MHz. In total, there are 1 elements. It consumes 250μA of quiescent There are 24 terminations,It is a member of the 74ABT823 family. The power source is powered by 5V. The input capacitance of this JK flip flopis 4pF farads. Electronic devices of this type belong to the ABTfamily. There is a base part number FF/Latchesfor the RS flip flops. As soon as Vsup reaches 5.5V, the maximum supply voltage is reached. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D latch runs on a voltage of 5V volts. A D flip flop with 2embedded ports is available. In addition, WITH CLEAR AND CLOCK ENABLEis a characteristic of it.
74ABT823PW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT823PW,118 Applications
There are a lot of NXP USA Inc. 74ABT823PW,118 Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Latch
- CMOS Process
- Patented noise
- Functionally equivalent to the MC10/100EL29
- Count Modes
- Bus hold
- High Performance Logic for test systems
- Data Synchronizers
- Dynamic threshold performance