74ABT74D,118
| Parameters | |
|---|---|
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 0.05mA |
| Number of Output Lines | 1 |
| Clock Edge Trigger Type | Positive Edge |
| Length | 8.65mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 14 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 14 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT74 |
| Function | Set(Preset) and Reset |
| Output Type | Differential |
| Operating Supply Voltage | 5V |
| Polarity | Non-Inverting |
| Number of Circuits | 2 |
| Load Capacitance | 50pF |
| Clock Frequency | 250MHz |
| Propagation Delay | 6.2 ns |
| Turn On Delay Time | 3 ns |
| Family | ABT |
| Logic Function | AND, D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 15mA 20mA |
| Number of Bits per Element | 1 |
| Max Propagation Delay @ V, Max CL | 4.2ns @ 5V, 50pF |
74ABT74D,118 Overview
The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. As part of the package Tape & Reel (TR), it is embedded. T flip flop uses Differentialas its output configuration. The trigger configured with it uses Positive Edge. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 250MHz. It consumes 50μA of quiescent current without being affected by external factors. There are 14 terminations,The 74ABT74 family contains this object. A voltage of 5V provides power to the D latch. Input capacitance of this device is 3pF farads. In terms of electronic devices, this device belongs to the ABTfamily of devices. There is an electronic part that is mounted in the way of Surface Mount. This board has 14 pins. This device has the clock edge trigger type of Positive Edge. Its superior flexibility is attributed to its use of 2 circuits. High efficiency requires the supply voltage to be maintained at 5V. It has 1 output lines to operate.
74ABT74D,118 Features
Tape & Reel (TR) package
74ABT series
14 pins
74ABT74D,118 Applications
There are a lot of Nexperia USA Inc. 74ABT74D,118 Flip Flops applications.
- Matched Rise and Fall
- Set-reset capability
- Shift Registers
- Bus hold
- Balanced Propagation Delays
- Control circuits
- Instrumentation
- Supports Live Insertion
- Data transfer
- Clock pulse