74ABT574ADB,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | BROADSIDE VERSION OF 374 |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT574 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 400MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.7ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| Input Capacitance | 3pF |
| Power Supply Current-Max (ICC) | 30mA |
| Height Seated (Max) | 2mm |
| Length | 7.2mm |
| Width | 5.3mm |
| RoHS Status | ROHS3 Compliant |
74ABT574ADB,112 Overview
20-SSOP (0.209, 5.30mm Width)is the packaging method. It is contained within the Tubepackage. This output is configured with Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. Surface Mountmounts this electrical part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. In FPGA terms, D flip flop is a type of 74ABTseries FPGA. It should not exceed 400MHzin terms of its output frequency. A total of 1elements are present in it. It consumes 250μA of quiescent current without being affected by external factors. It has been determined that there have been 20 terminations. It is a member of the 74ABT574 family. Power is supplied from a voltage of 5V volts. Its input capacitance is 3pFfarads. A device of this type belongs to the family of ABT. It is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. An electrical current of 5V volts is applied to it. The flip flop has 2ports embedded within it. It is also characterized by BROADSIDE VERSION OF 374.
74ABT574ADB,112 Features
Tube package
74ABT series
5V power supplies
74ABT574ADB,112 Applications
There are a lot of NXP USA Inc. 74ABT574ADB,112 Flip Flops applications.
- Buffer registers
- ESD protection
- CMOS Process
- ESCC
- Frequency Divider circuits
- Supports Live Insertion
- Control circuits
- Individual Asynchronous Resets
- High Performance Logic for test systems
- Safety Clamp