74ABT374CMSA
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 20 |
| Supplier Device Package | 20-SSOP |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Type | D-Type |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Voltage - Supply | 4.5V~5.5V |
| Frequency | 200MHz |
| Base Part Number | 74ABT374 |
| Function | Standard |
| Output Type | Tri-State, Non-Inverted |
| Operating Supply Voltage | 5V |
| Number of Elements | 1 |
| Polarity | Non-Inverting |
| Number of Circuits | 8 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Number of Bits | 8 |
| Clock Frequency | 200MHz |
| Propagation Delay | 5 ns |
| Turn On Delay Time | 3.2 ns |
| Logic Function | D-Type, Flip-Flop |
| Current - Quiescent (Iq) | 50μA |
| Current - Output High, Low | 32mA 64mA |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 5ns @ 5V, 50pF |
| Trigger Type | Positive Edge |
| High Level Output Current | -32mA |
| Input Capacitance | 5pF |
| Low Level Output Current | 64mA |
| Number of Input Lines | 1 |
| Number of Output Lines | 3 |
| Clock Edge Trigger Type | Positive Edge |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
74ABT374CMSA Overview
20-SSOP (0.209, 5.30mm Width)is the way it is packaged. The package Tubecontains it. T flip flop uses Tri-State, Non-Invertedas its output configuration. Positive Edgeis the trigger it is configured with. This electronic part is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. A temperature of -40°C~85°C TAis considered to be the operating temperature. A flip flop of this type is classified as a D-Type. It is a type of FPGA belonging to the 74ABT series. You should not exceed 200MHzin its output frequency. A total of 1elements are contained within it. T flip flop consumes 50μA quiescent energy. The 74ABT374family includes it. The input capacitance of this JK flip flopis 5pF farads. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 20 pins. There is a clock edge trigger type of Positive Edgeon this device. It is designed with 8bits. In order to achieve its superior flexibility, 8 circuits are used. In order to achieve high efficiency, the supply voltage should be maintained at 5V. There are 3 output lines in this JK flip flop. This input has 1lines. There is -32mA output current at the high level. 64mA is the low level output current. Ideally, the operating temperature should be below 85°C. It is recommended that the operating temperature be greater than -40°C. The minimal supply voltage is 4.5V. 5.5Vis its maximum supply voltage. The frequency can be set to 200MHz.
74ABT374CMSA Features
Tube package
74ABT series
20 pins
8 Bits
74ABT374CMSA Applications
There are a lot of ON Semiconductor 74ABT374CMSA Flip Flops applications.
- Event Detectors
- Communications
- Automotive
- Storage Registers
- Supports Live Insertion
- Parallel data storage
- Safety Clamp
- Clock pulse
- Modulo – n – counter
- Dynamic threshold performance