74ABT374APW,118
| Parameters | |
|---|---|
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT374 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 1 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Load Capacitance | 50pF |
| Number of Ports | 2 |
| Clock Frequency | 300MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 250μA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4.9ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 5.2 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 5.2 ns |
| Power Supply Current-Max (ICC) | 30mA |
| Max Frequency@Nom-Sup | 200000000Hz |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
74ABT374APW,118 Overview
As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at -40°C~85°C TA. This logic flip flop is classified as type D-Type. It belongs to the 74ABTseries of FPGAs. You should not exceed 300MHzin its output frequency. In total, there are 1 elements. As a result, it consumes 250μA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The object belongs to the 74ABT374 family. An input voltage of 5Vpowers the D latch. This T flip flop has a capacitance of 4pF farads at the input. The electronic device belongs to the ABTfamily. This device is part of the FF/Latchesbase part number family. The maximal supply voltage (Vsup) reaches 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. The D flip flop is embedded with 2ports.
74ABT374APW,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT374APW,118 Applications
There are a lot of NXP USA Inc. 74ABT374APW,118 Flip Flops applications.
- Common Clocks
- Frequency division
- EMI reduction circuitry
- Divide a clock signal by 2 or 4
- Bounce elimination switch
- Single Up Count-Control Line
- Computing
- Circuit Design
- ESD performance
- Instrumentation