74ABT16374BDGG,512
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 260MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16374BDGG,512 Overview
As a result, it is packaged as 48-TFSOP (0.240, 6.10mm Width). It is contained within the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. It is configured with a trigger that uses Positive Edge. This electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74ABT series. It should not exceed 260MHzin terms of its output frequency. A total of 2elements are present in it. T flip flop consumes 2mA quiescent energy. There have been 48 terminations. D latch belongs to the 74ABT16374 family. A voltage of 5V is used to power it. A JK flip flop with a 4pFfarad input capacitance is used here. It belongs to the family of electronic devices known as ABT. The part is included in FF/Latches. It reaches 5.5Vwhen the maximum supply voltage (Vsup) is applied. For normal operation, the supply voltage (Vsup) should be above 4.5V. It operates from 5V power supplies. A D flip flop with 2embedded ports is available.
74ABT16374BDGG,512 Features
Tube package
74ABT series
5V power supplies
74ABT16374BDGG,512 Applications
There are a lot of NXP USA Inc. 74ABT16374BDGG,512 Flip Flops applications.
- Guaranteed simultaneous switching noise level
- Shift Registers
- Communications
- QML qualified product
- Synchronous counter
- Automotive
- Buffered Clock
- Digital electronics systems
- Power down protection
- CMOS Process