74ABT16374BDGG,112
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-TFSOP (0.240, 6.10mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Reach Compliance Code | unknown |
| Base Part Number | 74ABT16374 |
| Function | Standard |
| Qualification Status | Not Qualified |
| Output Type | Tri-State, Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Number of Ports | 2 |
| Clock Frequency | 260MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 2mA |
| Output Characteristics | 3-STATE |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4.7 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4.7 ns |
| Power Supply Current-Max (ICC) | 19mA |
| Width | 6.1mm |
| RoHS Status | ROHS3 Compliant |
74ABT16374BDGG,112 Overview
The item is packaged in 48-TFSOP (0.240, 6.10mm Width)cases. A package named Tubeincludes it. There is a Tri-State, Non-Invertedoutput configured with it. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A 4.5V~5.5Vsupply voltage is required for it to operate. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. JK flip flop is a part of the 74ABTseries of FPGAs. You should not exceed 260MHzin the output frequency of the device. A total of 2 elements are present. As a result, it consumes 2mA of quiescent current without being affected by external factors. 48terminations have occurred. JK flip flop belongs to 74ABT16374 family. A voltage of 5V is used to power it. There is 4pF input capacitance for this T flip flop. In terms of electronic devices, this device belongs to the ABTfamily of devices. The RS flip flops belongs to FF/Latches base part number. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be above 4.5V. There are 5V power supplies attached to it. The flip flop contains 2ports.
74ABT16374BDGG,112 Features
Tube package
74ABT series
5V power supplies
74ABT16374BDGG,112 Applications
There are a lot of NXP USA Inc. 74ABT16374BDGG,112 Flip Flops applications.
- Event Detectors
- Communications
- Differential Individual
- ATE
- Single Down Count-Control Line
- Storage registers
- Guaranteed simultaneous switching noise level
- Test & Measurement
- Bounce elimination switch
- Digital electronics systems