74ABT16273DL,118
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 48-BSSOP (0.295, 7.50mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2004 |
| Series | 74ABT |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 48 |
| Type | D-Type |
| Terminal Finish | NICKEL PALLADIUM GOLD |
| Subcategory | FF/Latches |
| Packing Method | TAPE AND REEL |
| Technology | BICMOS |
| Voltage - Supply | 4.5V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.635mm |
| Reach Compliance Code | unknown |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | 74ABT16273 |
| Function | Master Reset |
| Qualification Status | Not Qualified |
| Output Type | Non-Inverted |
| Number of Elements | 2 |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 5V |
| Supply Voltage-Min (Vsup) | 4.5V |
| Clock Frequency | 240MHz |
| Family | ABT |
| Current - Quiescent (Iq) | 1mA |
| Current - Output High, Low | 32mA 64mA |
| Output Polarity | TRUE |
| Max I(ol) | 0.064 A |
| Number of Bits per Element | 8 |
| Max Propagation Delay @ V, Max CL | 3.4ns @ 5V, 50pF |
| Prop. Delay@Nom-Sup | 4 ns |
| Trigger Type | Positive Edge |
| Input Capacitance | 4pF |
| Propagation Delay (tpd) | 4 ns |
| Max Frequency@Nom-Sup | 150000000Hz |
| Width | 7.5mm |
| RoHS Status | ROHS3 Compliant |
74ABT16273DL,118 Overview
It is packaged in the way of 48-BSSOP (0.295, 7.50mm Width). You can find it in the Tape & Reel (TR)package. There is a Non-Invertedoutput configured with it. This trigger uses the value Positive Edge. The electronic part is mounted in the way of Surface Mount. Powered by a 4.5V~5.5Vvolt supply, it operates as follows. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The FPGA belongs to the 74ABT series. This D flip flop should not have a frequency greater than 240MHz. A total of 2 elements are present. T flip flop consumes 1mA quiescent energy. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The 74ABT16273 family contains this object. It is powered by a voltage of 5V . JK flip flop input capacitance is 4pF farads. This D flip flop belongs to the family of ABT. This part is included in FF/Latches. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normal operation requires a supply voltage (Vsup) above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It operates from 5V power supplies.
74ABT16273DL,118 Features
Tape & Reel (TR) package
74ABT series
5V power supplies
74ABT16273DL,118 Applications
There are a lot of NXP USA Inc. 74ABT16273DL,118 Flip Flops applications.
- Balanced 24 mA output drivers
- Instrumentation
- Matched Rise and Fall
- Data storage
- Asynchronous counter
- Registers
- Modulo – n – counter
- Single Down Count-Control Line
- 2 – Bit synchronous counter
- Counters