72V851L15TFI
| Parameters | |
|---|---|
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 40mA |
| Max Supply Current | 40mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
72V851L15TFI Overview
You can find FIFO memory chip in package LQFP .Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.64 pins are the operation pins.The maximum current required for its operation is 40mA .The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.It is designed to run at a minimum temperature of -40°C degrees Celsius to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.It is contained within FIFOs .It has a type OTHER FIFO memory IC.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.There are a total of 64 pins on this board.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.During normal operation, the FIFO memory's maximum value is 66.7MHz .
72V851L15TFI Features
FIFOs category
Frequency at most
72V851L15TFI Applications
There are a lot of Integrated Device Technology (IDT) 72V851L15TFI FIFOs Memory applications.
- Fabrication Site
- Video
- Programmable Logic Controller
- Portable Information Devices
- Industrial Systems
- Consumer
- PC peripheral
- Network switching/routing
- Telecommunication
- Application that requires re-writable nonvolatile parameter memory