72V3622L15PQF
| Parameters | |
|---|---|
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 132 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn/Pb) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | MAIL BOX BYPASS REGISTER |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 132 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 400mA |
| Max Supply Current | 400mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 36b |
| Organization | 256X36 |
| Density | 18 kb |
| Standby Current-Max | 0.001A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 36b |
| Memory IC Type | BI-DIRECTIONAL FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 4.57mm |
| Length | 24.13mm |
| Width | 24.13mm |
| Thickness | 3.55mm |
| Radiation Hardening | No |
| RoHS Status | Non-RoHS Compliant |
| Lead Free | Contains Lead |
| Mount | Surface Mount |
| Package / Case | PQFP |
| Number of Pins | 132 |
| Published | 2013 |
72V3622L15PQF Overview
FIFO memory chip is contained in the PQFP package.It is recommended that memory IC be mounted in the Surface Mount direction.High efficiency is possible with a supply voltage of 3.3V .A total of 132 terminations are contained within FIFO means.Operation pins are 132 .In order for FIFO design to operate, FIFO design requires a maximum current of 400mA .A 3.3V supply voltage will ensure FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , this gadget is self-contained.This part is equipped with an IC of type BI-DIRECTIONAL FIFO memory.The FIFO memory chip may be operated at very low supply voltages, such as3V volts.FIFO memory can handle a maximum supply voltage of 3.6V V.There are a total of 132 pins on this board.In spite of the frequency 66.7MHz , it is capable of maintaining a good level of accuracy.For regular operation, the memory logic's maximum value is 66.7MHz .The gadget can also generate a value of MAIL BOX BYPASS REGISTER .
72V3622L15PQF Features
FIFOs category
Frequency at most
72V3622L15PQF Applications
There are a lot of Integrated Device Technology (IDT) 72V3622L15PQF FIFOs Memory applications.
- High-speed disk
- Application that requires re-writable nonvolatile parameter memory
- Industrial Systems
- SPI Bus Flash Memory Devices
- Tape controllers
- Laser Receiver System
- Data
- Temporary storage elements
- Network switching/routing
- HDD