72V291L10TFG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 128KX9 |
| Density | 1.1 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V291L10TFG Overview
FIFO memory chip is contained in the LQFP package.Surface Mount is recommended as the mounting method.If the supply voltage is set to 3.3V , high efficiency can be achieved.As a result of this, FIFO means contains 64 terminations.64 pins are the operation pins.FIFO requires a minimum of 55mA current to operate.In order to maximize efficiency, the supply voltage should be set to 3.3V .At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.70°C °C is the memory logic's maximum operating temperature that allows stable operation.A self-contained gadget is contained in FIFOs .A OTHER FIFO memory type IC is used in the part.There is a possibility that FIFO may operate at a very low supply voltage, such as 3V V.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.As a result, it contains a total of 64 pins.When the frequency is set to 100MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 100MHz .
72V291L10TFG Features
FIFOs category
Frequency at most
72V291L10TFG Applications
There are a lot of Integrated Device Technology (IDT) 72V291L10TFG FIFOs Memory applications.
- PC peripheral
- General Data Collection Applications at Low-Temperatures
- Networking
- Computer networks
- Extended product-change notification
- General Data Collection Applications at Extreme High-Temperatures
- Event Recorder
- Alarm System
- Routers
- Magnetic memories