72V281L10TF8
| Parameters | |
|---|---|
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Density | 576 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
72V281L10TF8 Overview
This package is included in LQFP .There's a Tape & Reel on the package.It is pointing in the direction of Surface Mount .It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .As far as the operation pins are concerned, they are 64 pins.FIFO design requires a maximum current of 55mA to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.Its maximum operating temperature of 70°C °C ensures stable operation.The gadget is self-contained and can be found in FIFOs .A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.There is a maximum supply voltage of 3.6V volts that FIFO memory can handle.The FIFO memory IC has a total of 64 pins.A frequency of 100MHz is sufficient to maintain good accuracy.During regular operation, 100MHz is the FIFO memory's maximum value.
72V281L10TF8 Features
FIFOs category
Frequency at most
72V281L10TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V281L10TF8 FIFOs Memory applications.
- Game Consoles
- General Data Collection Applications at Low-Temperatures
- Test Equipment
- Multimedia
- Data
- Game Controller
- SPI Bus Flash Memory Devices
- High-speed graphics pixel buffer
- Firmware loaders
- Test site