72V275L15TF8
| Parameters | |
|---|---|
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 32KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
72V275L15TF8 Overview
You will find FIFO memory chip in the LQFP package.This FIFO memory chip is packaged as a Tape & Reel (TR) .Mounting it Surface Mount is recommended.A supply voltage of 3.3V allows for high efficiency.64 terminations are contained in FIFO means.64 pins are the operation pins.For its operation, 60mA is the maximum current required.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.It is self-contained in FIFOs .It has a OTHER FIFO memory type IC.In some cases, FIFO operates at a very low supply voltage, such as 3V V.A maximum voltage of 3.6V volts can be applied to FIFO memory.Currently, it has 64 pins.During regular operation, 66.7MHz is the FIFO memory's maximum value.
72V275L15TF8 Features
FIFOs category
Frequency at most
72V275L15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V275L15TF8 FIFOs Memory applications.
- Notebook
- Portable Information Devices
- General Data Collection Applications at Extreme High-Temperatures
- Portable Information Devices
- Video time base correction
- Laser Receiver System
- Extended product life cycle
- SPI Bus Flash Memory Devices
- Transistors
- Routers