72V275L10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 60mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 32KX18 |
| Standby Current-Max | 0.015A |
| Memory Density | 589824 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V275L10PF8 Overview
The TQFP package contains FIFO memory chip.Mounting it in Surface Mount is recommended.With a supply voltage of 3.3V volts, high efficiency is possible.FIFO means contains a total of 64 terminations.The operation pins are 64 pins.FIFO design requires 60mA amps of current to operate.A supply voltage of 3.3V is recommended for FIFO's maximum efficiency.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.Typically, FIFO would work at 3V volts, but it may also work at higher voltages.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.The FIFO memory IC has a total of 64 pins.A FIFO memory's maximum value of 100MHz can be used for regular operation.
72V275L10PF8 Features
FIFOs category
Frequency at most
72V275L10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V275L10PF8 FIFOs Memory applications.
- TVs
- IP Camera Buffer
- Battery Charger
- Microprogramming
- Computer Systems
- Consumer Systems
- Extended product life cycle
- Notebook
- Computer networks
- Networking