72V263L10PFI
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2003 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V263L10PFI Overview
The TQFP package contains FIFO memory chip.Mounting it Surface Mount is recommended.Supply voltages of 3.3V are capable of achieving high efficiency.In FIFO means, there are 80 terminations.These are the 80 pins for operation.In order to operate it, it requires 35mA volts of current.A voltage of 3.3V should be used for FIFO's maximum efficiency.FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.An operating temperature of 85°C °C is necessary for stable operation.It is self-contained in FIFOs .A OTHER FIFO memory type IC is used in the part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3.15V volts.A maximum supply voltage of 3.45V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 80 pins.When the frequency is set to 100MHz , the system can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V263L10PFI Features
FIFOs category
Frequency at most
72V263L10PFI Applications
There are a lot of Integrated Device Technology (IDT) 72V263L10PFI FIFOs Memory applications.
- High-speed graphics pixel buffer
- Multi-stage synchronizer
- Data communications
- Computer Systems
- Temporary storage elements
- Controlled baseline
- Extended product life cycle
- General Data Collection Applications at Extreme High-Temperatures
- HDD
- Digital buffering