72V261LA20TF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2002 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA20TF8 Overview
FIFO memory chip is included in the LQFP package.You'll find it packaged in the shape of a Tape & Reel .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 3.3V , high efficiency is possible.FIFO means contains a total of 64 terminations.In the case of the operation pins, they are 64 pins.In order to operate FIFO design, a maximum current of 55mA is required.FIFO is recommended that the supply voltage be set to 3.3V for maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.There is a self-contained gadget within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.Despite a frequency of 50MHz , it is capable of maintaining good accuracy.For regular operation, the memory logic's maximum value is 50MHz .Additionally, this FIFO memory can be used to generate RETRANSMIT; AUTO POWER DOWN .
72V261LA20TF8 Features
FIFOs category
Frequency at most
72V261LA20TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA20TF8 FIFOs Memory applications.
- Game Controller
- Network switching/routing
- Application that requires re-writable nonvolatile parameter memory
- High-speed disk
- Computer Systems
- Test Equipment
- Telecommunication
- Buses
- Digital buffering
- Notebook