72V261LA15TF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Packaging | Tape & Reel |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT; AUTO POWER DOWN |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 16KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V261LA15TF8 Overview
FIFO memory chip is included in the LQFP package.It comes in a Tape & Reel package.Memory IC's recommended mounted way is Surface Mount .If the supply voltage is set to 3.3V , high efficiency can be achieved.FIFO means contains a total of 64 terminations.There are 64 pins for operation.In order for FIFO design to operate, FIFO design requires a maximum current of 55mA .For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .It is designed to run at a minimum temperature of 0°C degrees Celsius to ensure reliability.70°C °C is the memory logic's maximum operating temperature that allows stable operation.In FIFOs , there is a self-contained gadget.In this part, the memory type is OTHER FIFO .There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.An input voltage of 3.6V V is the maximum that FIFO memory can handle.There are a total of 64 pins on this FIFO memory IC.Despite a frequency of 66.7MHz , it is capable of maintaining good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.Additionally, RETRANSMIT; AUTO POWER DOWN can be generated with this FIFO memory.
72V261LA15TF8 Features
FIFOs category
Frequency at most
72V261LA15TF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA15TF8 FIFOs Memory applications.
- GPS Offender Tracking
- Consumer Systems
- Event Recorder
- Computers
- Data-acquisition systems
- Thermal Management for DDR3 Memory Modules
- Magnetic memories
- SPI Bus Flash Memory Device
- Disk Controllers
- Rate buffers