72V261LA10TFG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 16KX9 |
| Standby Current-Max | 0.02A |
| Memory Density | 147456 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V261LA10TFG8 Overview
LQFP is the package in which FIFO memory chip is contained.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .The number of terminations in FIFO means is 64 .As far as the operation pins are concerned, they are 64 pins.The maximum current required for its operation is 55mA .When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.At a minimum working temperature of 0°C degrees Celsius, FIFO is guaranteed to operate reliably.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.There is a self-contained gadget within FIFOs .There is a memory type OTHER FIFO in the IC of this part.FIFO may operate at a very low supply voltage, such as 3V V.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.There is 100MHz FIFO memory IC's maximum value for regular operation.Additionally, this FIFO memory is capable of generating RETRANSMIT as well.
72V261LA10TFG8 Features
FIFOs category
Frequency at most
72V261LA10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V261LA10TFG8 FIFOs Memory applications.
- IP Camera Buffer
- Industrial Systems
- Game Consoles
- Computer networks
- General Data Collection Applications at Extreme High-Temperatures
- Portable Information Devices
- Tape controllers
- Battery Charger
- Down-Hole Energy Drilling
- Emulators