72V255LA10TFG8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 55mA |
| Max Supply Current | 55mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Data Bus Width | 18b |
| Organization | 8KX18 |
| Density | 144 kb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V255LA10TFG8 Overview
You can find FIFO memory chip in the TQFP package.Surface Mount is memory IC's recommended mounting method.Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 64 terminations.There are 64 pins for operation.In order for FIFO design to operate, a maximum current of 55mA is required.Set the supply voltage to 3.3V to ensure FIFO's maximum efficiency.It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget is self-contained and can be found in FIFOs .The IC of the part is OTHER FIFO memory type.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.Approximately 64 pins are attached to it.A frequency of 100MHz is sufficient to maintain good accuracy.A FIFO memory's maximum value of 100MHz can be used for regular operation.It is also possible to generate RETRANSMIT with the use of this FIFO memory.
72V255LA10TFG8 Features
FIFOs category
Frequency at most
72V255LA10TFG8 Applications
There are a lot of Integrated Device Technology (IDT) 72V255LA10TFG8 FIFOs Memory applications.
- Signal processing
- Battery Charger
- General Data Collection Applications at Extreme High-Temperatures
- TVs
- Programmable Logic Controller
- SPD for DDR3 Memory Modules
- Transistors
- Code converters
- Networking
- Buses