72V243L7-5PFGI8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | MATTE TIN |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Additional Feature | IT CAN ALSO BE CONFIGURED AS 4K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Pin Count | 80 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 30mA |
| Frequency (Max) | 133.3MHz |
| Access Time | 5 ns |
| Organization | 2KX18 |
| Memory Density | 36864 bit |
| Parallel/Serial | PARALLEL |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72V243L7-5PFGI8 Overview
FIFO memory chip is contained in the TQFP package.Memory IC's recommended mounted way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.A total of 80 terminations are contained within FIFO means.FIFO design has 80 operation pins.FIFO requires a minimum of 30mA current to operate.When setting the supply voltage to 3.3V , you will achieve FIFO's maximum efficiency.This FIFO products runs at -40°C degrees Celsius at a minimum temperature to ensure reliability.Its maximum operating temperature of 85°C °C ensures stable operation.Typically, FIFO would work at 3.15V volts, but it may also work at higher voltages.A maximum supply voltage of 3.45V V can be handled by this FIFO memory chip.The FIFO memory IC is equipped with a total of 80 pins.It is recommended that the FIFO memory's maximum value be set to 133.3MHz .It is also possible to generate IT CAN ALSO BE CONFIGURED AS 4K X 9; RETRANSMIT; ASYNCHRONOUS MODE IS ALSO POSSIBLE using this FIFO memory.
72V243L7-5PFGI8 Features
Frequency at most
72V243L7-5PFGI8 Applications
There are a lot of Integrated Device Technology (IDT) 72V243L7-5PFGI8 FIFOs Memory applications.
- Desktop Computers
- Portable Information Devices
- Look-up Tables
- Address mapping
- Game Controller
- Rate buffers
- Portable Information Devices
- Temporary storage elements
- Programmable Logic Controller
- Analog-to-digital converters