72V233L6PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 80 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 80 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Frequency | 166MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 80 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.45V |
| Min Supply Voltage | 3.15V |
| Element Configuration | Dual |
| Max Supply Current | 35mA |
| Frequency (Max) | 166MHz |
| Access Time | 4 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.015A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 6 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V233L6PF Overview
You will find FIFO memory chip in the TQFP package.The recommended mounting method for this FIFO products is Surface Mount .Supply voltages of 3.3V are capable of achieving high efficiency.FIFO means contains 80 terminations.The operation pins are 80 pins.In order to operate it, it requires 35mA volts of current.A 3.3V supply voltage will ensure FIFO's maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.By operating at 70°C degrees Celsius, this FIFO products is able to maintain a stable operation.The gadget in FIFOs is self-contained.A OTHER FIFO type memory IC is present in the FIFO memory chip.In some cases, FIFO operates at a very low supply voltage, such as 3.15V V.FIFO memory is capable of handling a maximum supply voltage of 3.45V volts.Approximately 80 pins are attached to it.A frequency of 166MHz is sufficient to maintain good accuracy.During normal operation, the FIFO memory's maximum value is 166MHz .
72V233L6PF Features
FIFOs category
Frequency at most
72V233L6PF Applications
There are a lot of Integrated Device Technology (IDT) 72V233L6PF FIFOs Memory applications.
- High-speed disk
- Tape controllers
- Queues for communication systems
- Cardiac Monitoring Device
- Magnetic memories
- Game Controller
- Medical Monitoring Device
- Programmable Logic Controller
- Measurement Equipment
- MP3 Interface for Automobile