72V225L15PF8
| Parameters | |
|---|---|
| Max Supply Current | 30mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 1KX18 |
| Density | 18 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 30mA |
72V225L15PF8 Overview
You can find FIFO memory chip in package TQFP .Mounting it in the Surface Mount way is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .As a result of this, FIFO means contains 64 terminations.Operation pins are 64 .In order for FIFO design to operate, a maximum current of 30mA is required.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.The gadget is self-contained and can be found in FIFOs .There is a memory type OTHER FIFO in the IC of this part.There is a possibility that FIFO can operate at very low supply voltages, such as 3V V.FIFO memory can handle a maximum supply voltage of 3.6V volts.The FIFO memory IC is equipped with a total of 64 pins.When the frequency is set to 66.7MHz it can maintain good accuracy.The memory logic's maximum value is 66.7MHz for regular operation.It is also possible to generate EASILY EXPANDABLE IN DEPTH AND WIDTH using this FIFO memory.
72V225L15PF8 Features
FIFOs category
Frequency at most
72V225L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72V225L15PF8 FIFOs Memory applications.
- Consumer Systems
- Laser Receiver System
- Medical Monitoring Device
- IP Radio
- Tape controllers
- Measurement Equipment
- Industrial Systems
- Programmable Logic Controller
- Consumer
- Digital buffering