72V2105L20PF
| Parameters | |
|---|---|
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | EASILY EXPANDABLE IN DEPTH AND WIDTH |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 50MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 50MHz |
| Access Time | 12 ns |
| Organization | 256KX18 |
| Density | 4.5 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2008 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
72V2105L20PF Overview
FIFO memory chip is contained in the TQFP package.Mounting it Surface Mount is recommended.It is possible to achieve high efficiency with a supply voltage of 3.3V .FIFO means contains a total of 64 terminations.These are the 64 pins for operation.FIFO design requires 60mA amps of current to operate.When the supply voltage is set to 3.3V , the FIFO's maximum efficiency is achieved.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.The gadget in FIFOs is self-contained.ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at very low supply voltages, such as 3V volts.A maximum supply voltage of 3.6V volts can be handled by the FIFO memory chip.The FIFO memory IC has a total of 64 pins.When the frequency is set to 50MHz it can maintain good accuracy.For regular operation, the memory logic's maximum value is 50MHz .With the help of this FIFO memory, EASILY EXPANDABLE IN DEPTH AND WIDTH can also be generated.
72V2105L20PF Features
FIFOs category
Frequency at most
72V2105L20PF Applications
There are a lot of Integrated Device Technology (IDT) 72V2105L20PF FIFOs Memory applications.
- Event Recorder
- Firmware loaders
- Programmable Logic Controller
- Industrial Systems
- Fabrication Site
- Routers
- Rate buffers
- MP3 Interface for Automobile
- Video
- One assembly