72V201L10J
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Frequency | 100MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 20mA |
| Max Supply Current | 20mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 256X9 |
| Density | 2.3 kb |
| Standby Current-Max | 0.005A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 3.55mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V201L10J Overview
FIFO memory chip is included in the PLCC package.Mounting it in the Surface Mount way is recommended.When the supply voltage is 3.3V , high efficiency is possible.A total of 32 terminations can be found in FIFO means.These are the 32 pins for operation.FIFO requires a minimum of 20mA current to operate.The supply voltage should be set to 3.3V in order to achieve FIFO's maximum efficiency.This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.A self-contained gadget is contained in FIFOs .The IC of the part is of the type OTHER FIFO .The FIFO memory chip may be operated at very low supply voltages, such as3V volts.A maximum supply voltage of 3.6V V can be handled by this FIFO memory chip.It has a total of 32 pins on it.When the frequency is set to 100MHz , the system can maintain good accuracy.The memory logic's maximum value is 100MHz for regular operation.
72V201L10J Features
FIFOs category
Frequency at most
72V201L10J Applications
There are a lot of Integrated Device Technology (IDT) 72V201L10J FIFOs Memory applications.
- Video Processing
- IP Camera Buffer
- SPD for DDR3 Memory Modules
- Code converters
- Event Recorder
- Cameras
- Controlled baseline
- Data
- Network switching/routing
- Switches