72V03L15J
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | PLCC |
| Number of Pins | 32 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | J BEND |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 1.27mm |
| Pin Count | 32 |
| Operating Supply Voltage | 3.3V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 3V |
| Element Configuration | Dual |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Clock Frequency | 50MHz |
| Access Time | 15 ns |
| Organization | 2KX9 |
| Density | 18 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| FWFT Support | No |
| Output Enable | NO |
| Cycle Time | 25 ns |
| Height Seated (Max) | 3.556mm |
| Length | 13.97mm |
| Width | 11.43mm |
| Thickness | 2.79mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72V03L15J Overview
PLCC is a package that contains FIFO memory chip.Memory IC's recommended mounted way is Surface Mount .With a supply voltage of 3.3V volts, high efficiency is possible.I found that it has 32 terminations in FIFO means.Operation pins are 32 .For its operation, 60mA is the maximum current required.A 3.3V supply voltage will ensure FIFO's maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The stable operation is enabled by the memory logic's maximum operating temperature of 70°C °C.A self-contained gadget is contained within FIFOs .There is a memory type OTHER FIFO in the IC of this part.It is possible to operate the FIFO memory chip at very low supply voltages, such as 3V volts.The FIFO memory chip is capable of handling maximum supply voltages of 3.6V volts.Approximately 32 pins are attached to it.This FIFO memory IC operates at a frequency of 50MHz .
72V03L15J Features
FIFOs category
Clock frequency of 50MHz
72V03L15J Applications
There are a lot of Integrated Device Technology (IDT) 72V03L15J FIFOs Memory applications.
- Controlled baseline
- Seismic Data Collection at Extreme Temperatures
- Character generators
- Test Equipment
- Transistors
- Signal processing
- SPI Bus Flash Memory Devices
- Programmable Logic Controller
- Extended product life cycle
- IP Radio