Parameters |
Factory Lead Time |
7 Weeks |
Contact Plating |
Lead, Tin |
Mount |
Surface Mount |
Package / Case |
PLCC |
Number of Pins |
32 |
Published |
2005 |
Part Status |
Active |
Max Operating Temperature |
85°C |
Min Operating Temperature |
-40°C |
Operating Supply Voltage |
3.3V |
Max Supply Voltage |
3.6V |
Min Supply Voltage |
3V |
Memory Size |
512B |
Element Configuration |
Dual |
Nominal Supply Current |
60mA |
Max Supply Current |
60mA |
Frequency (Max) |
28.5MHz |
Access Time |
25 ns |
Data Bus Width |
9b |
Direction |
Unidirectional |
Density |
4.5 kb |
Sync/Async |
Asynchronous |
Word Size |
9b |
Bus Directional |
Unidirectional |
Retransmit Capability |
Yes |
FWFT Support |
No |
Programmable Flags Support |
No |
Length |
13.97mm |
Width |
11.43mm |
Thickness |
2.79mm |
RoHS Status |
RoHS Compliant |
Lead Free |
Contains Lead |
72V01L25JI Overview
The PLCC package contains FIFO memory chip.In addition to storing applications and data, the FIFO chips have a memory of 512B .Surface Mount is recommended as the mounting method.32 pin is used for operation.In order for FIFO design to operate, a maximum current of 60mA is required.For FIFO's maximum efficiency, the supply voltage should be set to 3.3V .FIFO operates at a minimum temperature of -40°C degrees Celsius to ensure reliabilFIFOy.Its maximum operating temperature of 85°C °C ensures stable operation.If the supply voltage is very low, such as 3V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 3.6V volts.It is recommended that the FIFO memory's maximum value be set to 28.5MHz .
72V01L25JI Features
512B memory size
Frequency at most
72V01L25JI Applications
There are a lot of Integrated Device Technology (IDT) 72V01L25JI FIFOs Memory applications.
- IP Camera Buffer
- Measurement Equipment
- Fabrication Site
- Computer Systems
- Disk Controllers
- Medical Monitoring Device
- Microprogramming
- Extended product-change notification
- Data communications
- Tape controllers