72T7295L4-4BBG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ASYNCHRONOUS OPERATION ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 130mA |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 32KX72 |
| Standby Current-Max | 0.02A |
| Memory Density | 2359296 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.44 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72T7295L4-4BBG Overview
You can find FIFO memory chip in the BGA package.The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 2.5V , high efficiency can be achieved.FIFO consists of 324 terminations, which indicates that FIFO means is empty.324 pins are the operation pins.The maximum current required for its operation is 130mA .For FIFO's maximum efficiency, the supply voltage should be set to 2.5V .This FIFO products runs at 0°C degrees Celsius at a minimum temperature to ensure reliability.Keeping the operating temperature at 70°C °C allows the FIFO products to operate continuously.It is self-contained in FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.Typically, FIFO would work at 2.375V volts, but it may also work at higher voltages.FIFO memory can handle a maximum supply voltage of 2.625V V.Currently, it has 324 pins.Normally, the FIFO memory's maximum value is 225MHz .This gadget can also generate ASYNCHRONOUS OPERATION ALSO POSSIBLE .
72T7295L4-4BBG Features
FIFOs category
Frequency at most
72T7295L4-4BBG Applications
There are a lot of Integrated Device Technology (IDT) 72T7295L4-4BBG FIFOs Memory applications.
- Cameras
- Network bridges
- Multi-stage synchronizer
- Laser Receiver System
- Networking
- Desktop Computers
- Down-Hole Energy Drilling
- Network switching/routing
- HDD
- Analog-to-digital converters