72T72105L10BB
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 324 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 324 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn63Pb37) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | ASYNCHRONOUS OPERATION ALSO POSSIBLE |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 324 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Operating Mode | SYNCHRONOUS |
| Max Supply Current | 130mA |
| Frequency (Max) | 100MHz |
| Access Time | 4.5 ns |
| Organization | 64KX72 |
| Standby Current-Max | 0.05A |
| Memory Density | 4718592 bit |
| Parallel/Serial | PARALLEL |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72T72105L10BB Overview
You can find FIFO memory chip in the BGA package.Surface Mount is memory IC's recommended mounting method.It is possible to achieve high efficiency with a supply voltage of 2.5V .324 terminations are contained in FIFO means.There are 324 pins on the operation pins.For its operation, 130mA is the maximum current required.In order to maximize efficiency, the supply voltage should be set to 2.5V .To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.Low supply voltages, such as 2.375V V, may be required for operation.The memory logic's maximum supply voltage is 2.625V volts.As a result, it contains a total of 324 pins.It is recommended that the FIFO memory's maximum value be set to 100MHz .It is also possible to generate ASYNCHRONOUS OPERATION ALSO POSSIBLE with the use of this FIFO memory.
72T72105L10BB Features
FIFOs category
Frequency at most
72T72105L10BB Applications
There are a lot of Integrated Device Technology (IDT) 72T72105L10BB FIFOs Memory applications.
- Desktop Computers
- Transistors
- Code converters
- Networking
- Consumer Systems
- Thermal Management for DDR3 Memory Modules
- Telecommunication
- Communications Systems
- Queues for communication systems
- Alarm System