72T36125L4-4BBG
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Copper, Silver, Tin |
| Mount | Surface Mount |
| Package / Case | BGA |
| Number of Pins | 240 |
| Published | 2009 |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 240 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 2.5V |
| Terminal Pitch | 1mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Pin Count | 240 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 2.5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 2.625V |
| Min Supply Voltage | 2.375V |
| Element Configuration | Dual |
| Nominal Supply Current | 90mA |
| Max Supply Current | 90mA |
| Frequency (Max) | 225MHz |
| Access Time | 3.4 ns |
| Organization | 256KX36 |
| Density | 9 Mb |
| Standby Current-Max | 0.02A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 36b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Output Enable | YES |
| Cycle Time | 4.4 ns |
| Height Seated (Max) | 1.97mm |
| Length | 19mm |
| Width | 19mm |
| Thickness | 1.76mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
72T36125L4-4BBG Overview
You can find FIFO memory chip in package BGA .Surface Mount is recommended as the mounting method.When the supply voltage is 2.5V , high efficiency is possible.FIFO means contains 240 terminations.The operation pins are 240 pins.In order for FIFO design to operate, a maximum current of 90mA is required.FIFO is recommended that the supply voltage be set to 2.5V in order to maximize efficiency.To ensure reliabilFIFOy, FIFO runs at a minimum working temperature of 0°C degrees Celsius.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.A self-contained gadget is contained within FIFOs .ICs of type OTHER FIFO are used in the FIFO memory chip.FIFO may operate at a very low supply voltage, such as 2.375V V.A maximum voltage of 2.625V volts can be applied to FIFO memory.There are a total of 240 pins on this board.It is recommended that the FIFO memory's maximum value be set to 225MHz .
72T36125L4-4BBG Features
FIFOs category
Frequency at most
72T36125L4-4BBG Applications
There are a lot of Integrated Device Technology (IDT) 72T36125L4-4BBG FIFOs Memory applications.
- HDD
- Desktop Computers
- Data-acquisition systems
- Firmware loaders
- Telecommunication
- Switches
- High-speed disk
- Tape controllers
- Optical memories
- Signal processing