7285L12PA
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TSSOP |
| Number of Pins | 56 |
| Published | 2012 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 |
| Number of Terminations | 56 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Additional Feature | RETRANSMIT |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 56 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Element Configuration | Dual |
| Nominal Supply Current | 150mA |
| Max Supply Current | 150mA |
| Clock Frequency | 50MHz |
| Access Time | 12 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Parallel/Serial | PARALLEL |
| Sync/Async | Asynchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Unidirectional |
| Retransmit Capability | Yes |
| Programmable Flags Support | No |
| Output Enable | NO |
| Cycle Time | 20 ns |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Width | 6.1mm |
| Thickness | 1mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
7285L12PA Overview
FIFO memory chip can be found in the TSSOP package.It is recommended that memory IC be mounted in the Surface Mount direction.A supply voltage of 5V is capable of producing high efficiency.FIFO means contains 56 terminations.The operation pins are 56 pins.FIFO design requires a maximum current of 150mA to operate.For FIFO's maximum efficiency, the supply voltage should be set to 5V .Keeping the temperature at 0°C degrees Celsius ensures its reliability.By operating at a temperature of 70°C °C, the FIFO products is capable of stable operation.There is a self-contained gadget within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at a very low supply voltage, such as 4.5V V.A maximum supply voltage of 5.5V volts can be handled by the FIFO memory chip.There are a total of 56 pins on this board.In normal circumstances, the component has 5V power supplies.With the help of this FIFO memory, RETRANSMIT can also be generated.The clock of the FIFO memory IC runs at 50MHz frequency.
7285L12PA Features
FIFOs category
Clock frequency of 50MHz
7285L12PA Applications
There are a lot of Integrated Device Technology (IDT) 7285L12PA FIFOs Memory applications.
- HDD
- Multimedia
- Disk Controllers
- Data communications
- Game Consoles
- Fabrication Site
- Buses
- Extended product-change notification
- PC peripheral
- Programmable Logic Controller