72851L15TF
| Parameters | |
|---|---|
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 80mA |
| Max Supply Current | 80mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Organization | 8KX9 |
| Density | 144 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| FWFT Support | No |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 10mm |
| Width | 10mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | LQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
72851L15TF Overview
FIFO memory chip can be found in the LQFP package.A Surface Mount mounting method is recommended.A supply voltage of 5V is capable of producing high efficiency.A total of 64 terminations can be found in FIFO means.The operation pins are 64 pins.In order to operate it, it requires 80mA volts of current.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.For reliability, FIFO works at a minimum temperature of 0°C degrees Celsius.The memory logic's maximum operating temperature is 70°C °C, which allows for stable operation.In FIFOs , there is a self-contained gadget.A OTHER FIFO memory type IC is used in the part.If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.This FIFO memory chip can handle maximum supply voltages of 5.5V volts.There are a total of 64 pins on this FIFO memory IC.When the frequency is set to 66.7MHz , the system can maintain good accuracy.During regular operation, the FIFO memory's maximum value is 66.7MHz .In normal circumstances, the component has 5V power supplies.
72851L15TF Features
FIFOs category
Frequency at most
72851L15TF Applications
There are a lot of Integrated Device Technology (IDT) 72851L15TF FIFOs Memory applications.
- Extended product-change notification
- Character generators
- Test site
- Game Controller
- Optical memories
- High-speed disk
- Temporary storage elements
- Computers
- Network bridges
- Data-acquisition systems