72841L15PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 64 |
| Published | 2005 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 64 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 240 |
| Number of Functions | 2 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 66.7MHz |
| Time@Peak Reflow Temperature-Max (s) | 20 |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 60mA |
| Max Supply Current | 60mA |
| Frequency (Max) | 66.7MHz |
| Access Time | 10 ns |
| Data Bus Width | 9b |
| Organization | 4KX9 |
| Density | 72 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 9b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Programmable Flags Support | Yes |
| Output Enable | YES |
| Cycle Time | 15 ns |
| Height Seated (Max) | 1.6mm |
| Length | 14mm |
| Width | 14mm |
| Thickness | 1.4mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72841L15PF Overview
This package is included in TQFP .The recommended mounting method for this FIFO products is Surface Mount .If the supply voltage is set to 5V , high efficiency can be achieved.In FIFO means, there are 64 terminations.The operation pins are 64 pins.In order to operate FIFO design, a maximum current of 60mA is required.FIFO is recommended that the supply voltage be set to 5V for maximum efficiency.During operation, a minimum temperature of 0°C degrees Celsius should be maintained in order to ensure reliability.An operating temperature of 70°C °C is necessary for stable operation.FIFOs contains this gadget in its entirety.This part has a memory type of OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.A maximum voltage of 5.5V volts can be applied to FIFO memory.It has a total of 64 pins on it.When the frequency is set to 66.7MHz it can maintain good accuracy.It is recommended that the FIFO memory's maximum value be set to 66.7MHz .It is normal for the component to own 5V power supplies.
72841L15PF Features
FIFOs category
Frequency at most
72841L15PF Applications
There are a lot of Integrated Device Technology (IDT) 72841L15PF FIFOs Memory applications.
- Computer networks
- Analog-to-digital converters
- Temporary storage elements
- Look-up Tables
- Portable Information Devices
- Data-acquisition systems
- Industrial Systems
- Extended product life cycle
- SPI Bus Flash Memory Devices
- Firmware loaders