72825LB10PF8
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 1KX18 |
| Density | 36 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72825LB10PF8 Overview
You can find FIFO memory chip in package TQFP .It is recommended that memory IC be mounted in the Surface Mount direction.When the supply voltage is 5V , high efficiency is possible.In FIFO means, there are 128 terminations.There are 128 pins for operation.Its maximum operating current is 100mA .For FIFO's maximum efficiency, the supply voltage should be set to 5V .It operates at 0°C degrees Celsius to ensure reliability.As a result of having a maximum operating temperature of 70°C degrees Celsius, the unit is capable of exhibiting stable operation.This gadget is self-contained in?FIFOs .In this part, the memory type is OTHER FIFO .If the supply voltage is very low, such as 4.5V V, FIFO may be able to operate.FIFO memory can handle a maximum supply voltage of 5.5V volts.There are a total of 128 pins on this FIFO memory IC.A frequency of 100MHz is sufficient to maintain good accuracy.Normally, the FIFO memory's maximum value is 100MHz .Normally, the component owns 5V power supplies.
72825LB10PF8 Features
FIFOs category
Frequency at most
72825LB10PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72825LB10PF8 FIFOs Memory applications.
- Communications Systems
- Tape controllers
- Computer Systems
- Game Controller
- TVs
- High-speed graphics pixel buffer
- Down-Hole Energy Drilling
- Routers
- Rate buffers
- Telecommunication