72815LB10PF
| Parameters | |
|---|---|
| Factory Lead Time | 7 Weeks |
| Contact Plating | Lead, Tin |
| Mount | Surface Mount |
| Package / Case | TQFP |
| Number of Pins | 128 |
| Published | 2009 |
| JESD-609 Code | e0 |
| Pbfree Code | no |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 |
| Number of Terminations | 128 |
| ECCN Code | EAR99 |
| Terminal Finish | Tin/Lead (Sn85Pb15) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| HTS Code | 8542.32.00.71 |
| Subcategory | FIFOs |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 225 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 100MHz |
| Pin Count | 128 |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Temperature Grade | COMMERCIAL |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Nominal Supply Current | 100mA |
| Max Supply Current | 100mA |
| Frequency (Max) | 100MHz |
| Access Time | 6.5 ns |
| Organization | 512X18 |
| Density | 18 kb |
| Standby Current-Max | 0.01A |
| Parallel/Serial | PARALLEL |
| Sync/Async | Synchronous |
| Word Size | 18b |
| Memory IC Type | OTHER FIFO |
| Bus Directional | Bidirectional |
| Retransmit Capability | No |
| FWFT Support | Yes |
| Output Enable | YES |
| Cycle Time | 10 ns |
| Height Seated (Max) | 1.6mm |
| Length | 20mm |
| Width | 14mm |
| Thickness | 1.4mm |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
72815LB10PF Overview
The TQFP package contains FIFO memory chip.It is recommended that memory IC be mounted in the Surface Mount direction.With a supply voltage of 5V volts, high efficiency is possible.A total of 128 terminations can be found in FIFO means.These are the 128 pins for operation.The maximum current required for its operation is 100mA .Set the supply voltage to 5V to ensure FIFO's maximum efficiency.Keeping the temperature at 0°C degrees Celsius ensures its reliability.A memory logic's maximum operating temperature of 70°C degrees Celsius assures stable operation.A self-contained gadget is contained within FIFOs .The IC of the part is OTHER FIFO memory type.FIFO may operate at very low supply voltages, such as 4.5V volts.FIFO memory can handle a maximum supply voltage of 5.5V V.It has a total of 128 pins on it.When the frequency is set to 100MHz , the system can maintain good accuracy.During normal operation, the FIFO memory's maximum value is 100MHz .Normally, 5V power supplies are owned by the component.
72815LB10PF Features
FIFOs category
Frequency at most
72815LB10PF Applications
There are a lot of Integrated Device Technology (IDT) 72815LB10PF FIFOs Memory applications.
- Wireless
- Data communications
- SPI Bus Flash Memory Device
- Notebook
- Computer Systems
- PC peripheral
- Portable Information Devices
- TVs
- IP Radio
- Routers