| Parameters |
| Factory Lead Time |
7 Weeks |
| Contact Plating |
Lead, Tin |
| Mount |
Surface Mount |
| Package / Case |
TQFP |
| Number of Pins |
32 |
| Published |
2005 |
| Part Status |
Active |
| Max Operating Temperature |
70°C |
| Min Operating Temperature |
0°C |
| Frequency |
66.7MHz |
| Operating Supply Voltage |
5V |
| Max Supply Voltage |
5.5V |
| Min Supply Voltage |
4.5V |
| Element Configuration |
Dual |
| Nominal Supply Current |
35mA |
| Max Supply Current |
35mA |
| Frequency (Max) |
66.7MHz |
| Access Time |
10 ns |
| Direction |
Unidirectional |
| Density |
576 b |
| Sync/Async |
Synchronous |
| Word Size |
9b |
| Bus Directional |
Unidirectional |
| Retransmit Capability |
No |
| FWFT Support |
No |
| Programmable Flags Support |
Yes |
| Length |
7mm |
| Width |
7mm |
| Thickness |
1.4mm |
| RoHS Status |
RoHS Compliant |
| Lead Free |
Contains Lead |
72421L15PF8 Overview
TQFP is the package in which FIFO memory chip is contained.Mounting it in Surface Mount is recommended.The operation pins are 32 pins.There is a maximum current requirement of 35mA for its operation.For FIFO's maximum efficiency, the supply voltage should be set to 5V .The FIFO products must be run at a minimum temperature of 0°C degrees Celsius to ensure reliability.By using a memory logic's maximum operating temperature of 70°C degrees Celsius, stable operation can be achieved.It is possible to operate the FIFO memory chip at very low supply voltages, such as 4.5V volts.FIFO memory is capable of handling a maximum supply voltage of 5.5V volts.It maintains good accuracy at a 66.7MHz frequency.Normally, the FIFO memory's maximum value is 66.7MHz .
72421L15PF8 Features
Frequency at most
72421L15PF8 Applications
There are a lot of Integrated Device Technology (IDT) 72421L15PF8 FIFOs Memory applications.
- Medical Monitoring Device
- Computers
- Multi-stage synchronizer
- Network switching/routing
- SPI Bus Flash Memory Device
- Wireless
- A/D output buffers
- Data-acquisition systems
- Smart Meter
- Address mapping